Equipment for production of cartridges

PJSC “Lugansk cartridge works” is one of leaders among manufacturer of the equipment for cartridges production in the territory of CIS. Being at the same time the user and manufacturer of the equipment for production of cartridges for rifled and smooth-bore small arms, PJSC “Lugansk cartridge works” is ready to offer the range of services for arranging of the manufacturing, grounding on deep knowledge and experience that was accumulated for many years of work in the sphere of exploitation and manufacturing of equipment intended for production of cartridges for rifled and smooth-bore firearms.

Press PV 100/800 Thermochemical Aggregate M-AF 1 Machine М-UOP
Furnace ОKB 355 ARL M-LLG in a set with drying furnace M-PSG Drawbench VS 1/550
Thermochemical aggregate 1-АТ-1 Automatic rotary line М-LLOG-2-56 Horizontal press VVSO
ARL М-LG-1p in a set with cooling line LOH-107 Machine for cartridje case survey SA - 41 Automatic rotary line М-LKG-56
Automatic rotary line М-LG-2 Set of Equipment VR-51 Ageing line М-LV
Thermochemical aggregate 1-AOS-1М Automatic rotary line 4L-5 ARCL М-LGP-56
Automatic rotary line 1-LG-305 Automatic rotary line М-LMS-56 Packing line LU 56
Automatic rotary line М-LG-4-56 Automatic rotary line М-LP Thermochemical aggregate М-АT-1
Automatic rotary line М-LMOG-56 Aggregate М-АP Automatic rotary line М-LSP-56

Press PV 100/800

Press PV 100/800

function

Special-purpose press PV 100/800 is intended for blanking of parts from strip material.

unctional operations

Blanking.

line composition

  • станина;
  • bed;
  • main drive;
  • electrical cabinet;
  • slide block;
  • feeding drive;
  • cage;
  • counterbalancing device;
  • air line;
  • oil line;
  • pneumatic cooling of punch;
  • electrical equipment;
  • flywheel guarding;
  • modular clutchbrake unit;
  • chute;
  • device for sorting of half-done parts.
technical features
Manufacturing capacity, pcs per minute 870
Power consumption 15,64 kilowatt
Compressed air consumption 10,5 m3/h
Overall dimensions without packing:
Length 3400 mm
Width 3400 mm
Height 2900 mm
Own weight 13170 kg
Dimensions with packaging:
Length 3420 mm
Width 2422 mm
Height 2060 mm
Own weight 14875 kg
Capacity of press, ton-force 100 тс
Traverse travel 30 mm
Ram stroke frequency 140 мин-1
Swing between table and traverse when it is in lower position 430 mm
Adjustment of distance between table and traverse 420 mm
Clear dimension between 420 mm
Table dimensions 770x1130 mm
Apertures in table 400x250 mm
Feed pitch of material:
maximal 40 mm
minimal 17 mm
Anvil-cap thickness 100 mm
Supply main current type Alternating, three-phase.
Current frequency 50 Hz
Voltage 380 В
Operating conditions of press Single automatic manual cranking
Level of protection IP55

Furnace ОKB 355

Furnace ОKB 355

function

Furnace of the model ОKB-355 is intended for heat treatment of cartridge components.

unctional operations

Annealing of blanks.

furnace component parts

  • electric furnace;
  • control cabinet;
  • two transformers ТС3-100/0.66;
  • bath of cooling drum.
technical features
Manufacturing capacity, pcs per minute 750-1050
Manufacturing capacity, pcs per minute 1500
Power consumption 128 kilowatt
Cooling water consumption 3,7 m3/h
Quantity of air aspirated by exhaust ventilation 600 m3/h
Overall dimensions without packing:
Length 8720 mm
Length of "cold" screw 3100 mm
Width 2294 mm
Height 1990 mm
Own weight 9400 kg
Dimensions of working space:
Diameter of “hot”screw (barrel) 406+-4 mm
Screw active length 3975+-8 mm
Fettling weight 3480 kg.
Type of current of power system Alternating, three-phase
Current frequency 50 Hz
Voltage 380 В
Level of protection IP55

Thermochemical aggregate 1-АТ-1

Thermochemical aggregate 1-АТ-1

function

Thermochemical aggregate of model 1-AT-1 is intended for thermochemical treatment of cartridge case blanks.

unctional operations

  • Pickling;
  • Rinsing;
  • Phosphatizing;
  • Rinsing;
  • Saponification;
  • Separation;
  • Drying;
  • Cooling.

line composition

  • bed;
  • frame;
  • drive;
  • drum.
  • tank;
Manufacturing capacity, pcs per minute 1800+-100
Quantity of air aspirated by exhaust ventilation 4000 m3/h
Power consumption 29,7 kilowatt
Cooling water consumption 10 m3/h
Overall dimensions without packing:
Length 6000 mm
Width 2200 mm
Height 2310 mm
Own weight 8000 kg
Maximum steam pressure 3 atm.
Duration of product passage in the aggregate 45,5+- min
Level of protection IP55

Automatic rotary line М-LG-1p in a set with cooling line LOH-107

Automatic rotary line М-LG-1p in a set with cooling line LOH-107

function

Automatic Rotary Line of М-LG-1р model in a set with Cooling Line LOH-107 is intended for manufacture of billets of 1st and 2nd drawing, for crystallization annealing of billets of 2nd drawing and further cooling.

unctional operations

  • First cupping/drawing;
  • Second drawing;
  • Recrystallization annealing;
  • Cooling.

line composition

  • bed;
  • main drive;
  • automatic feeder;
  • automatic feeder drive;
  • electrical control cabinet;
  • hydraulic actuation mechanism;
  • annealing inductor;
  • cupping and drawing rotor;
  • drawing rotor;
  • annealing rotor;
  • LOH-107
  • drum;
  • main drive;
technical features
Name M-LG-1p LOH-107
Manufacturing capacity, pcs per minute 200+20 200+-20
Quantity of air aspirated by exhaust ventilation 600 m3/h ---
Coefficient of utilization, not less then 0,85 ---
Power consumption, (installed*) 62,56 kilowatt 0,37 kilowatt
Water flow 4,3 m3/h 0,2 m3/h
Compressed air consumption 8,7 m3/h ---
Overall dimensions without packing:
Length 3730+-20 mm 1560 mm
Width 1050+-10 mm 566 mm
Height 2720+-20 mm 1286 mm
Own weight 7300+-50 kg 457 kg
Level of protection IP55 IP55

Automatic rotary line М-LG-2

Automatic rotary line М-LG-2

function

Automatic Rotary Line of М-LG-2 model is intended for third and fourth drawings, and for first and second cutting of cartridge case billets.

unctional operations

  • Third drawing;
  • First cutting;
  • Fourth drawing;
  • Second cutting.

composition of line

  • bed;
  • main drive;
  • hydraulic actuator installation;
  • feeding rotor;
  • third drawing rotor;
  • first cutting rotor;
  • fourth drawing rotor;
  • second cutting rotor;
  • transport rotors.
  • finished product container
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,85
Power consumption, (installed*) 62,56 kilowatt
Cooling water consumption 2,3 m3/h
Compressed air consumption 0,66 m3/h
Overall dimensions without packing:
Length 3748 mm
Width 1050 mm
Height 2720 mm
Own weight 7200 kg
Level of protection IP55

Thermochemical aggregate 1-AOS-1М

Thermochemical aggregate 1-AOS-1М

function

Thermochemical Aggregate of 1-AOS-1М model is intended for chemical degreasing of cartridge case billets.

unctional operations

  • Degreasing;
  • Washing;
  • Passivation;
  • Drying;
  • Cooling.

aggregate composition

  • bed;
  • drive;
  • frame;
  • drum;
  • baths;
  • vibrating chute.
technical features
Manufacturing capacity, pcs per minute 1600
Quantity of air aspirated by exhaust ventilation 3270 m3/h
Power consumption 29,33 kilowatt
Cooling water consumption 2,3 m3/h
Consumption of steam 192 kg/час
Overall dimensions without packing:
Length 4405 mm
Width 1980 mm
Height 2370 mm
Own weight 3500 kg
Maximum steam pressure 3 atm.
Level of protection IP55

Automatic rotary line 1-LG-305

Automatic rotary line 1-LG-305

function

Automatic Rotary Line of 1-LG-305 model is intended for manufacture of cartridge case forming billets.

unctional operations

  • First forming;
  • 100% automatic check of primer pocket depth;
  • Second forming;
  • 100% automatic check of anvil depth;
  • 100% automatic check of primer pocket diameter;

line composition

  • bed;
  • main drive;
  • feed automation;
  • electrical cabinet;
  • transport rotors;
  • first forming rotor;
  • pocket presence control rotor;
  • second forming rotor;
  • anvil height control rotor;
  • pocket diameter control rotor;
  • piercing rotor;
  • deburring rotor;
  • photocontrol rotor.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,85
Power consumption, (installed*) 20,93 kilowatt
Cooling water consumption 0,5 m3/h
Overall dimensions without packing:
Length 4435 mm
Width 1065 mm
Height 2375 mm
Own weight 7700 kg
Level of protection IP55

Automatic rotary line М-LG-4-56

Automatic rotary line М-LG-4-56

function

АAutomatic Rotary Line of М-LG-4-56 model is intended for tapering of cartridge case billets.

unctional operations

  • Annealing of mouths;
  • Cooling;
  • Pickling;
  • Rinsing;
  • Saponification;
  • First tapering;
  • Second tapering;
  • Rinsing;
  • Passivation;
  • Drying.

line composition

  • bed;
  • main drive;
  • hydraulic actuator installation;
  • tapering rotor;
  • annealing rotor;
  • cooling rotor;
  • annealing inductor;
  • operational rotor;
  • drying aggregate;
  • transport rotor;
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption, (installed*, без ТПЧ) 24 kilowatt
Cooling water consumption 4 m3/h
Consumption of steam 50 kg/час
Compressed air consumption 35 m3/h
Quantity of air aspirated by exhaust ventilation 2500 m3/h
Overall dimensions without packing:
Length 4990 mm
Width 1665 mm
Height 2396 mm
Own weight 11700 kg
Duration of passage of cases in line 9 min
Level of protection IP565

Automatic rotary line М-LMOG-56

Automatic rotary line М-LMOG-56

function

Automatic Rotary Line of М-LMOG-56 model is intended for cartridge cases machining and control.

unctional operations

  • Grooving;
  • Calibration;
  • Cutting of mouths;
  • 100% rim height check;
  • 100% extraction groove diameter check;
  • 100% cartridge case length check.

line composition

  • frame-type bed;
  • main drive;
  • feeding rotor;
  • grooving rotor;
  • calibration rotor;
  • cutting rotor;
  • rim height and groove diameter control rotors;
  • length control rotor;
  • transport rotors;
  • rim height check;
  • extraction groove diameter check;
  • length check;
  • spindle drive;
  • memory device.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption, (installed*) 4,6 kilowatt
Compressed air consumption 2,5 m3/h
Duration of passage of cases in line 0,5 min
Overall dimensions without packing:
Length 3246 mm
Width 910 mm
Height 2200 mm
Own weight 6800 kg
Level of protection IP565

Thermochemical Aggregate M-AF 1

Thermochemical Aggregate M-AF 1

function

Termochemical Aggregate of the model M-AF-1 is intended for chemical treatment of cartridge cases before lacquering.

unctional operations

  • Degreasing;
  • Rinsing;
  • Pickling;
  • Pickling;
  • Rinsing;
  • Phosphatizing 2 baths;
  • Rinsing;
  • Passivation;
  • Rinsing;
  • Rinsing;
  • Drying.

line composition

  • Aggregate consists of three component parts:
  • М-АF-1/Т – pickling aggregate;
  • М-АF-1/F – phosphatizing aggregate;
  • М-АF-1/S – drying aggregate.
technical features
Manufacturing capacity, pcs per minute 1600+-100
Вентиляция, количество отсасываемого воздуха 4500 m3/h
Power consumption 47 kilowatt
Cooling water consumption 7 m3/h
Duration of passage of cases in line 0,5 мин
Steam consumption 330 kg/час
Length 3246 mm
Overall dimensions without packing:
Length 12635 mm
Width 2100 mm
Height 2300
Own weight 13200 kg
Maximum steam pressure 3 atm.
Level of protection IP55

Автоматическая роторная линия М-ЛЛГ в комплекте с печью сушки М-ПСГ

Автоматическая роторная линия М-ЛЛГ в комплекте с печью сушки М-ПСГ

function

Automatic Rotary Line of the model M-LLG is intended for lacquering and drying of cartridge cases.

unctional operations

  • Lacquering;
  • Drying.

line composition

  • bed;
  • main drive;
  • feeding automation;
  • feeding rotor;
  • feeding chain;
  • cleaning mechanism;
  • drying inductor;
  • lacquering rotor;
  • transporting chain;
  • lacquering rotor;
  • transfer chute;
  • thyristor frequency
  • converter 20/8.
technical features
Name М-ЛЛГ М-ПСГ
Manufacturing capacity, pcs per minute 2000 м/час ---
Utilization factor, not less from theoretical production 0,6 ---
Power consumption 41,41 kilowatt 26,7 kilowatt
Water consumption 2 m3/h ---
Compressed air consumption 3 m3/h ---
Overall dimensions without packing:
Length 4265 mm 1900 mm
Width 1660 mm 1275 mm
Height 2315 mm 2300 mm
Own weight 3250 kg 1850 kg
Working temperature --- 170...185 С
Time of passing through furnace --- 30...35 min
Level of protection IP55 IP55

Automatic rotary line М-LLOG-2-56

Automatic rotary line М-LLOG-2-56

function

Automatic Rotary Line М-LLOG-2-56 is intended for complete automatic check of cartridge case dimensions and visual inspection of quality of cartridge case surface alongside with further onditional rejection of the flow.

unctional operations

  • 100% automatic check by special measuring tool
  • каморой;
  • 100% automatic check of anvil depth
  • 100% automatic check of pocket diameter;

состав линии

  • bed;
  • main drive;
  • feeding rotor;
  • electrical equipment installation;
  • ejection mechanism installation;
  • anvil depth control rotor;
  • pocket diameter control rotor;
  • control rotor for check by special measuring tool;
  • transport rotors.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption, (installed*) 3 kilowatt
Overall dimensions without packing:
Length 2115 mm
Width 880 mm
Height 2040 mm
Own weight 3900 kg
Level of protection IP55

Machine for cartridje case survey SA - 41

Machine for cartridje case survey SA - 41

function

Machine for Cartridge Case Survey SA-41 is intended for visual quality control of cartridge case surface.

unctional operations

  • 100% visual quality control.

machine component parts

  • bed and drive;
  • inspection devices;
  • feeding automates;
  • feeders;
  • luminous tube lamps;
  • screws;
  • mirror;
  • boxes for reject;
  • chutes.
technical features
Manufacturing capacity, pcs per minute 285+-15
Power consumption 0,6 kilowatt
Overall dimensions without packing:
Length 2670 mm
Width 600 mm
Height 1560 mm
Own weight 700 kg

Set of Equipment VR-51

Set of Equipment VR-51

function

Set of Equipment is intended for blanking and cupping of work pieces of bullet jacket.

unctional operations

  • Blanking;
  • Cupping.

set components

  • bundle holder;
  • straighten unwinding device;
  • winding device;
  • press VR-51;
  • Composition of press VR -51:
  • bed;
  • crankshaft with feed clutch and brake
  • guide block unit;
  • power feed unit with drive;
  • drive unit;
  • cooling unit;
technical features
Manufacturing capacity, pcs per minute 840
Power consumption 5,66 kilowatt
Overall dimensions without packing:
Length 1533 mm
Width 1322 mm
Height 2085 mm
Own weight 2500 kg
Level of protection IP55

Thermochemical aggregate М-АT-1

Thermochemical aggregate М-АT-1

function

Thermochemical Aggregate of М-АT-1 model is intended for chemical treatment of bullet jacket work piece.

unctional operations

  • Pickling;
  • Rinsing in cold water;
  • Saponification;
  • Separation;
  • Drying;
  • Cooling.

line composition

  • bed;
  • frame;
  • drive;
  • drums;
  • five baths.
technical features
Manufacturing capacity, pcs per minute 1500+-200
Exhaust ventilation, quantity of exhausted air 4000 m3/h
Power consumption 37,77 kilowatt
Water consumption 3 m3/h
Consumption of steam 160 kg/h
Overall dimensions without packing:
Length 6200 mm
Width 1845 mm
Height 2300 mm
Own weight 8500 kg
Level of protection IP55

Automatic rotary line 4L-5

Automatic rotary line 4L-5

function

Automatic Rotary Line of 4L-5 model is intended for manufacture of bullet jackets

unctional operations

  • First drawing;
  • Second drawing;
  • First tapering;
  • Second tapering;
  • Third tapering;
  • Fourth tapering;
  • Cutting of jacket;
  • Expanding of jacket.

line composition

  • bed;
  • electrical communication;
  • hydraulic actuator unit;
  • drawing rotor I;
  • drawing rotor III;
  • tapering rotor I;
  • tapering rotor II;
  • tapering rotor III;
  • cutting rotor IV;
  • expanding rotor;
  • removal rotor;
  • transport rotor;
  • feeding automaton.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption 30 kilowatt
Cooling water consumption 1 m3/h
Overall dimensions without packing:
Length 4360 mm
Width 1100 mm
Height 2397 mm
Own weight 10000 kg
Level of protection IP55

Automatic rotary line М-LMS-56

Automatic rotary line М-LMS-56

function

Automatic rotary line of model M-LMS-56 is intended for manufacture of lead jacket and preliminary bullet assembly.

unctional operations

  • Manufacture of lead slugs;
  • First forming;
  • Second forming;
  • Drying;
  • Insertion of core into jacket;
  • 100% visual control;
  • Insertion of unit with core into jacket and preliminary folding of jacket ends.

состав линии

  • bed;
  • memory device;
  • slug cutting rotor;
  • forming rotor;
  • drawing rotor;
  • drying rotor;
  • core insertion rotor;
  • inspection rotor;
  • transport rotors;
  • jacket feeding automaton;
  • kite chute;
  • core feeding automaton;
  • wire feeding device.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption 16,7 kilowatt
Quantity of the air exhausted by ventilation 2000 m3/h
Overall dimensions without packing:
Length 3955 mm
Width 1310 mm
Height 2030 mm
Own weight 6000 kg
Level of protection IP55

Automatic rotary line М-LP

Automatic rotary line М-LP

function

Automatic rotary line of model М-LP is intended for assembly of bullet.

unctional operations

  • Final insertion of unit with core into bullet jacket and flanging of jacket ends;
  • First tapering of bullet jacket boat tail;
  • First flanging of jacket ends;
  • Second flanging of jacket ends;
  • Second tapering of boat tail of bullet;
  • Diametrical calibration of bullet;
  • 100% automatic control of diameter of bullet bearing surface;
  • 100% automatic control of height of bullet boat tail body;
  • 100% automatic control of bullet length;
  • 100% automatic control of bullet weight.

line composition

  • bed;
  • main drive;
  • “unit”insertion rotor;
  • first tapering rotor;
  • shock absorber;
  • first flanging rotor;
  • second flanging rotor;
  • second tapering rotor;
  • calibration rotor;
  • knurling rotor;
  • control rotor;
  • memory device installation;
  • transport rotor;
  • electrical equipment;
  • weight unit.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption 5,5 kilowatt
Overall dimensions without packing:
Length 4085 mm
Width 840 mm
Height 2030 mm
Own weight 6500 kg
Level of protection IP55

Aggregate М-АP

Aggregate М-АP

function

Aggregate of М-АP model is intended for wiping of cartridge bullets with sawdust.

unctional operations

  • Load of bullets and sawdust into wiping section;
  • Wiping;
  • Separation of sawdust;
  • Unload of bullets (performed during loading process).

line composition

  • drum;
  • drive;
  • load device.
technical features
Manufacturing capacity, pcs per minute 200+-5
Exhaust ventilation, quantity of exhausted air 4000 m3/h
Power consumption 1,2 kilowatt
Compressed air consumption 0,07 m3/h
Working capacity of batcher of bunker 10 l
Working capacity of the doser bunker 3 l
Overall dimensions without packing:
Length 1425 mm
Width 920 mm
Height 1724 mm
Own weight 1000 kg
Level of protection IP55

Machine M-UOP

Machine M-UOP

function

Machine of М- UOP model is intended for visual quality control of bullet surface.

unctional operations

100% visual control of bullets.

composition of machine

  • bed;
  • inspection bench drive;
  • screw reduction gear;
  • automatic feeder;
  • kite chute;
  • products transportation mechanism;
  • electrical equipment;
  • light installation.
technical features
Manufacturing capacity, pcs per minute (120+-10)х2
Power consumption 1 kilowatt
Overall dimensions without packing:
Length 1445 mm
Width 850 mm
Height 1400 mm
Own weight 350 kg
Level of protection IP55

Drawbench VS 1/550

Drawbench VS 1/550

function

Drawbench BC 1/550 is intended for cold drawing of steel wire.

unctional operations

Steel wire calibration.

состав станка

  • draw bench;
  • pointing machine;
  • bundle holder.
technical features
Manufacturing capacity, pcs per minute (120+-10)х2
Power consumption 1 kilowatt
Overall dimensions without packing:
Length 1445 mm
Width 850 mm
Height 1400 mm
Own weight 350 kg
Level of protection IP55

Horizontal press VVSO

Horizontal press VVSO

function

Horizontal press VVSO is intended for cold upsetting of bullet steel cores.

unctional operations

Core forming.

line composition

  • bed;
  • slide block;
  • crankshaft;
  • drive;
  • feed;
  • feed drive and ejection drive;
  • cutting mechanism;
  • unwinding device.
technical features
Manufacturing capacity, pcs per minute 120+-10
Coefficient of utilization, not less then 0,7
Slide block effort 50 t
Power consumption 3 kilowatt
Overall dimensions without packing:
Length 2400 mm
Width 1300 mm
Height 1250 mm
Own weight 2300 kg
Level of protection IP55

Automatic rotary line М-LKG-56

Automatic rotary line М-LKG-56

function

Automatic rotary line of the model M-LKG-56 is intended for insertion of primer into cartridge case.

unctional operations

  • Primer insertion;
  • 100% automatic control of primer insertion depth.

состав линии

  • bed;
  • main drive;
  • spring buffer;
  • memory device;
  • signaling board;
  • control board;
  • insertion rotor;
  • control rotor;
  • transport rotors;
  • primer feeding cassette;
  • standby operation rotor;
  • loading rotor.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Installed capacity 1,5 kilowatt
Compressed air consumption 7 m3/h
Pressure 0,2 МПа
Overall dimensions without packing:
Length 2010 mm
Width 880 mm
Height 1965 mm
Own weight 2500 kg
Level of protection IP67

Automatic rotary line М-LSP-56

Automatic rotary line М-LSP-56

function

Automatic Rotary Line of M-LSP-56 model is intended for assembly, geometrical and weight control of cartridges.

unctional operations

  • Mouth expanding;
  • Powder chamber filling;
  • Propellant presence check;
  • Preliminary assembly of bullet with cartridge case;
  • Final assembly of bullet with cartridge case;
  • Tapering of cartridge mouth;
  • 100% check of cartridge configuration;
  • 100% check of cartridge case body length;
  • 100% check of cartridge length;
  • 100% check of cartridge weight.

line composition

  • bed;
  • main drive;
  • case feeding rotor;
  • mouth expanding rotor;
  • dosing rotor;
  • preliminary insertion rotor;
  • final insertion rotor;
  • tapering rotor;
  • control rotors;
  • length control rotor;
  • balance;
  • bullet feeding automaton;
  • memory device.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption 2 kilowatt
Overall dimensions without packing:
Length 3680 mm
Width 1170 mm
Height 2000 mm
Own weight 5300 kg
Level of protection IP67

Ageing line М-LV

Ageing line М-LV

function

Line of M-LV model is intended for transportation and ageing of finished cartridges.

unctional operations

Ageing of finished cartridges.

line composition

  • bed;
  • guarding;
  • loading mechanism;
  • cartridge conveyer;
  • conveyer drive;
  • overturn mechanism;
  • belt conveyor;
  • conveyer belt drive;
  • electrical communication;
  • hopper.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption 2,3 kilowatt
Overall dimensions without packing:
Length 656 mm
Width 1360 mm
Height 3665 mm
Own weight 1656 kg
Volume of each bowl in line 10+-1 l
Volume of compensating hopper 80+-1 l
Level of protection IP67

Automatic rotary chain line М-LGP-56

Automatic rotary chain line М-LGP-56

function

Automatic Rotary Chain Line of model M-LGP-56 is intended for cartridges sealing.

unctional operations

  • Sealing on cartridge case and bullet joint;
  • Sealing on primer pocket and primer seal;
  • Drying;
  • 100% visual inspection.

line composition

  • bed;
  • guarding;
  • sealing rotors;
  • main drive;
  • feeding automaton;
  • feeding rotors;
  • chain.
technical features
Manufacturing capacity, pcs per minute 200+20
Coefficient of utilization, not less then 0,7
Power consumption 1,8 kilowatt
Quantity of air aspirated by exhaust ventilation+ 500 m3/h
Overall dimensions without packing:
Length 2660 mm
Width 1626 mm
Height 1700 mm
Own weight 4160 kg
Level of protection IP67

Packing line LU 56

Packing line LU 56

function

Line LU-56 is intended for cartridges packing.

unctional operations

  • Arranging of cartridges into rows;
  • Arranging of cartridges rows one onto another with placement of paper layers between the rows;
  • Composition of package;
  • Stitching of package flaps;
  • Weighing of cartridges package;
  • Demagnetization of cartridges in package.

line composition

  • bed;
  • two feeding automatons;
  • two kite chutes;
  • cartridge conveyer;
  • kitting rotor;
  • layer feeding mechanism;
  • paper feeding mechanism;
  • cartridge receiving mechanism;
  • package conveyer;
  • package forming mechanism;
  • end forming mechanism;
  • package stitching mechanism;
  • weighing unit;
  • drive installation;
  • camshafts;
  • waterproof cabinet.
technical features
Manufacturing capacity, pcs per minute 200+20
Power consumption, (installed*) 2,1 kilowatt
Overall dimensions without packing:
Length 2570 mm
Width 1300 mm
Height 1570 mm
Own weight 1700 kg
Level of protection IP67